O'Connor | 1040
O’Connor 1040 Fluid Head and flowtech 100 Tripod System with handle and carry case.
[ ¥14,000 / day ] + tax
———
An upgrade from the O’Connor 1030 with an extra 10lbs (4.5kg) higher threshold, now up to 45lbs (20kg), The O’Connor 1040 is the perfect combination of sturdiness, fluidity and with the revolutionary design of the Flowtech 100 sticks almost eliminates the need for a hi-hat.
The OConnor Ultimate 1040 Fluid Head is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn or think about the differences between fluid heads. The head supports 45 pounds' worth of camera and accessories at a center of gravity (COG) 5 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own and helps the camera to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1040 is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1040 extremely versatile and suitable for use with heavy ENG-style cameras all the way down to lightweight cameras, while maintaining the same operational feel.
The 1040 features a large Euro-style quick release plate. The QR plate allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and back, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The included pan handle can be attached to either side of the the fluid head, utilizing the mounting rosette on either side of the head.
OConnor Flowtech 100mm Legs:
Max Payload: 30kg
Max Height Group: 55-60 inch
Min Height Group: 10-20 inch
Leg Section: 3 Section
Head Fitting: 100mm
Leg Lock Type: Single Flip Lock
Material: Carbon Fibre
O’Connor 1040 Fluid Head and flowtech 100 Tripod System with handle and carry case.
[ ¥14,000 / day ] + tax
———
An upgrade from the O’Connor 1030 with an extra 10lbs (4.5kg) higher threshold, now up to 45lbs (20kg), The O’Connor 1040 is the perfect combination of sturdiness, fluidity and with the revolutionary design of the Flowtech 100 sticks almost eliminates the need for a hi-hat.
The OConnor Ultimate 1040 Fluid Head is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn or think about the differences between fluid heads. The head supports 45 pounds' worth of camera and accessories at a center of gravity (COG) 5 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own and helps the camera to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1040 is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1040 extremely versatile and suitable for use with heavy ENG-style cameras all the way down to lightweight cameras, while maintaining the same operational feel.
The 1040 features a large Euro-style quick release plate. The QR plate allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and back, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The included pan handle can be attached to either side of the the fluid head, utilizing the mounting rosette on either side of the head.
OConnor Flowtech 100mm Legs:
Max Payload: 30kg
Max Height Group: 55-60 inch
Min Height Group: 10-20 inch
Leg Section: 3 Section
Head Fitting: 100mm
Leg Lock Type: Single Flip Lock
Material: Carbon Fibre
O’Connor 1040 Fluid Head and flowtech 100 Tripod System with handle and carry case.
[ ¥14,000 / day ] + tax
———
An upgrade from the O’Connor 1030 with an extra 10lbs (4.5kg) higher threshold, now up to 45lbs (20kg), The O’Connor 1040 is the perfect combination of sturdiness, fluidity and with the revolutionary design of the Flowtech 100 sticks almost eliminates the need for a hi-hat.
The OConnor Ultimate 1040 Fluid Head is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn or think about the differences between fluid heads. The head supports 45 pounds' worth of camera and accessories at a center of gravity (COG) 5 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own and helps the camera to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1040 is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1040 extremely versatile and suitable for use with heavy ENG-style cameras all the way down to lightweight cameras, while maintaining the same operational feel.
The 1040 features a large Euro-style quick release plate. The QR plate allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and back, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The included pan handle can be attached to either side of the the fluid head, utilizing the mounting rosette on either side of the head.
OConnor Flowtech 100mm Legs:
Max Payload: 30kg
Max Height Group: 55-60 inch
Min Height Group: 10-20 inch
Leg Section: 3 Section
Head Fitting: 100mm
Leg Lock Type: Single Flip Lock
Material: Carbon Fibre
| specification | |
|---|---|
| size | (W) 193 x (H) 158 x (D) 117mm |
| mass | 4.8kg (head body only) |
| tilt range | 90 ~ -90° |
| Load range Camera center of gravity 10cm | 23.5 kg |
| Load range Camera center of gravity 15cm | 18.1 kg |
| Load range Camera center of gravity 20cm | 14.5 kg |