Teradek | Bolt 4k | 750
Teradek Bolt 4K 750 Tx (HDMI/SDI) 4K Transmitter & Receiver capable over both SDI/HDMI new generation wireless transmitter
1x 750’ Transmitter — [ ¥ 12,000 / day ] + tax
1x 750’ Receiver — [ ¥ 9,000 / day ] + tax
-includes V-mount power passthrough.
Note: Capable of 4K wireless over both SDI and HDMI - Recommended for use with SmallHD 4K Monitors such as the Vision, Cine and OLED series.
—
With the Bolt 4K 750 12G-SDI/HDMI Wireless Transmitter from Teradek, you can transmit 4K60 video signals from a 12G-SDI or HDMI input to any Bolt 4K receiver with less than 1 ms of latency. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, as well as two M3 threaded holes. The four included antennas provide a powerful signal for up to a 750' line of sight.
The transmitter supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:22 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.
Power can be provided using the integrated 2-pin connector with the included power supply or by using the V-mount battery plate. The transmitter supports up to six receivers, and it can operate up to six transmitters in the same area along with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features built-in AES-256 encryption with RSA-1024 key exchange.
Also included are four antennas, a D-Tap power cable, an SDI cable, an HDMI cable, and a box with a foam insert to protect your transmitter.
HDMI and 12G-SDI inputs, with 12G-SDI loop-through output
750' line-of-sight range
Compatible with any Bolt 4K receiver
Up to 48 kHz 24-bit PCM embedded audio supported
SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
1/4"-20 and M3 mounting points
2-pin LEMO-type power input
Built-in display with joystick navigation
Micro-USB port for upgrades
Teradek Bolt 4K 750 Tx (HDMI/SDI) 4K Transmitter & Receiver capable over both SDI/HDMI new generation wireless transmitter
1x 750’ Transmitter — [ ¥ 12,000 / day ] + tax
1x 750’ Receiver — [ ¥ 9,000 / day ] + tax
-includes V-mount power passthrough.
Note: Capable of 4K wireless over both SDI and HDMI - Recommended for use with SmallHD 4K Monitors such as the Vision, Cine and OLED series.
—
With the Bolt 4K 750 12G-SDI/HDMI Wireless Transmitter from Teradek, you can transmit 4K60 video signals from a 12G-SDI or HDMI input to any Bolt 4K receiver with less than 1 ms of latency. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, as well as two M3 threaded holes. The four included antennas provide a powerful signal for up to a 750' line of sight.
The transmitter supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:22 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.
Power can be provided using the integrated 2-pin connector with the included power supply or by using the V-mount battery plate. The transmitter supports up to six receivers, and it can operate up to six transmitters in the same area along with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features built-in AES-256 encryption with RSA-1024 key exchange.
Also included are four antennas, a D-Tap power cable, an SDI cable, an HDMI cable, and a box with a foam insert to protect your transmitter.
HDMI and 12G-SDI inputs, with 12G-SDI loop-through output
750' line-of-sight range
Compatible with any Bolt 4K receiver
Up to 48 kHz 24-bit PCM embedded audio supported
SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
1/4"-20 and M3 mounting points
2-pin LEMO-type power input
Built-in display with joystick navigation
Micro-USB port for upgrades
Teradek Bolt 4K 750 Tx (HDMI/SDI) 4K Transmitter & Receiver capable over both SDI/HDMI new generation wireless transmitter
1x 750’ Transmitter — [ ¥ 12,000 / day ] + tax
1x 750’ Receiver — [ ¥ 9,000 / day ] + tax
-includes V-mount power passthrough.
Note: Capable of 4K wireless over both SDI and HDMI - Recommended for use with SmallHD 4K Monitors such as the Vision, Cine and OLED series.
—
With the Bolt 4K 750 12G-SDI/HDMI Wireless Transmitter from Teradek, you can transmit 4K60 video signals from a 12G-SDI or HDMI input to any Bolt 4K receiver with less than 1 ms of latency. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, as well as two M3 threaded holes. The four included antennas provide a powerful signal for up to a 750' line of sight.
The transmitter supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:22 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.
Power can be provided using the integrated 2-pin connector with the included power supply or by using the V-mount battery plate. The transmitter supports up to six receivers, and it can operate up to six transmitters in the same area along with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features built-in AES-256 encryption with RSA-1024 key exchange.
Also included are four antennas, a D-Tap power cable, an SDI cable, an HDMI cable, and a box with a foam insert to protect your transmitter.
HDMI and 12G-SDI inputs, with 12G-SDI loop-through output
750' line-of-sight range
Compatible with any Bolt 4K receiver
Up to 48 kHz 24-bit PCM embedded audio supported
SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
1/4"-20 and M3 mounting points
2-pin LEMO-type power input
Built-in display with joystick navigation
Micro-USB port for upgrades